Prestige Indirect or Direct Fired Series Paint Booth

The energy and maintenance savings offered by Prestige Series paint spray booths make this model the premier choice for consumers looking at the entire paint booth buying decision ­lighting, performance, and operating costs.

.

.

Lighting
The Prestige Series offers our best cabin lighting package. The Prestige 27' cabin features 23 Class I, Division II light fixtures with four 98CRI - T8 tubes and multi-voltage, energy efficient, electronic ballasts. These same features are provided by the optional six-tube fixtures for applications requiring enhanced visibility. The inside access fixtures horizontally line both side walls and hip angles. These continuous lighting banks produce up to 50% more measured light output than any booth on the market, providing unobstructed and unprecedented illumination.

Performance & Operational Savings
The Prestige Series offers the choice of indirect or direct-fired heating with a designed airflow that equals competitive designs that use 50% more horse power. The Prestige Series also provides the best laminar airflow in the industry. Optional controller technology, variable frequency drives, self-diagnostics, and energy savings controls give you the power and information you need to maximize production and minimize operating expenses.

Booth Construction
With pre-coated, galvanized, dual panel construction, two inches of insulation, tubular steel center, door hardware, sealing material, and nut and bolt assembly, Nova Verta paint booths are built to last. Factory pre-wiring expedites the installation of Nova Verta paint booth systems. Color-coded and labeled wiring in Seal Tite conduit, and easy-to-read installation manuals minimize the need for electrical contractors and reduce set-up time and expense.

Controller
The Siemens TD 200 touchpad with a three-inch, two line display makes the Raptor Direct-Fired Series incredibly easy to use. Simply scroll to change parameters like temperature values and cure times. Self-diagnostic screens indicate the location of problem areas on the touchpad display to keep the booth operating at peak production. Controller screens also dsipaly booth hours, booth pressure, and temperatures. With the Touchpad, the Raptor Direct-Fired Series puts total control at your fingertips

Options for the Prestige Series

Vortex System
Designed to work with any make or model of paint booth, the Vortex System is Nova  Verta USA's most cost-effective solution for waterborne paints. It consists of two towers and mounting hardware specifically designed to be easy to install and fully adjust to any desired position. The towers are typically installed vertically, with one positioned at each end of booth in opposite corners. Each powerful air accelerator nozzle set at 40 PSI will use less than 12 CFM and deliver over 600 feet per minute in the center of the booth. The system also includes a CFM monitoring gauge, water filter separator, air solenoid and automated timer control, and can be installed in less than a day. The added bonus to this system is that there are no wearing parts or filtration and the nozzles can be wiped clean with any cleaning agent in 30 seconds. Return on investment in a ortex System can be in as little as 90-120 days.

Wind System
For purchase with a new booth or as a booth retrofit, the Wind System features four corner wall panels, each with four, adjustable air nozzles that can be easily aimed at the vehicle or parts. The Wind System also uses ceiling filters to channel pre-heated and filtered cabin air through ductwork to specially-designed blowers located on the exterior of the paint booth. The blowers expedite air velocity and distribute the amplified air to the Wind System's corner wall panels, achieving additionally heated or non-heated air speeds over 400 feet per minute. When not in use, the nozzles are covered by a sealed door to prevent overspray contamination. Purchased with a new booth, the Wind System is automatically controlled through the touch screen operator station, eliminating additional power runs to a separate control panel. The times are fully adjustable and can also be used in cure mode, shortening cure times and thus saving energy and excelling production capability. The system can also be purchased at a later date and easily added if set up with Wind System Ready when purchasing a new booth with the nozzle panels already in your new booth.

Velocity Cure
If a new booth is in your budget, the Velocity Cure is ideal for select applications. This downdraft paint booth system provides increased airflow that can cut flashing time in half, raise paint surface temperature for baking several minutes faster, and slash cure times by half or more.  Velocity Cure operates without adjustable blow nozzles or additional fans, helping ensure cleaner paintwork and trimming the need for cutting and polishing.

Consult with your sales representative to determine which of these solutions will best meet your needs Nova Verta USA has three solutions to accelerate production using waterborne paints: Vortex System, Wind System, and Velocity Cure.