Truck Spray Paint Booths

For large industrial and commercial trucks, use the Maxi Range Series from Nova Verta. Like our automotive pray paint booths, the Maxi Range Series features uses the Nova Verta engineering hallmark: three distinct operating modes to maximize the energy efficiency of the complete painting process.

Note - All models are not shown, please contact us for any size you might be considering.

Maxi Range Series
In addition to the indirect heating, variable frequency drive, and touch screen control panel, the Maxi Range Series is rich with features. Proof of its high-quality construction is reflected in the tubular steel frame skeleton, insulated double wall panels, nut and bolt assembly, and electric rollup doors. Class 1 Division 2 inside access light fixtures deliver 30% more light compared to our closest competitor. The Maxi Range Series spray booths are ETL-listed as an entire unit, assuring performance and code compliance.

Available in a variety of booth sizes lengths range from 30 to 75 feet and heights to 18.1 feet. Unique additional options such as a center dividing door provides the flexibility to spray on one side of the booth, while curing on the other, or, with the press of a button, use the entire booth to handle larger projects. To learn more about other available options, or to obtain detailed product information, contact us today.

† Dimensions are approximate and not to be used for plant layout.

M401618 - "Maxi Range" - Solid Back 40.1' x 16.4' x 18.1' - Optional width (17.7') and height (16.4')

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 1 - M2 Intake with 2-7.5 h.p. motors.
• 2 - Direct drive turbine extractor with 10 h.p. motor.
• Power Flame 1.5 million BTU burner.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 2 Side exit doors
• 16 light fixtures on upper hip wall and 8 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, 100 cfm filter water trap, hose hanger, filters, pressure monitoring gauge and booth guard coating.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (2 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts
• NVOEWW10 - Water wash extractor (price option less dry unit) (2 required)
• ADDLIGHT - Class 1 Div2 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode
• NVOPDPM2-34 - Duct package add per 5' for all ducts

return to top

M441818 - "Maxi Range"

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 2 - M1.5 Intake with 2-7.5 hp motors.
• 2 - Direct drive turbine extractors with 10 hp motors.
• 2 - Power Flame 1.2 million BTU burners.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 2 Side exit doors
• 20 light fixtures on upper hip wall and 10 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (2 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M1.5 required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (3 required for sufficient air flow)
• ADDLIGHT - Class 1 Div2 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• OCER1116 - Electric center dividing door
• M50DP - Dual control system (2 booth panels)
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• OW20 - 20' width Option (includes upgrade to 2- M2)
• OW23 - 23' width Option (includes upgrade to 2- M2)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode (each)
• NVOPDPACK34 - Duct package add per 5' for all ducts (each M1.5/W1DD)

return to top

M501618 - "Maxi Range" - Solid Back 53.9' x 16.4' x 18.1' - Optional width (17.7') and height (16.4')

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• 1 Row Pit (39").
• Variable Frequency Drive by Allen Bradley.
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 2 - M1.5 Intake with 2-7.5 h.p. motors.
• 3 - Direct drive turbine extractors with 10 h.p. motors.
• 2 - Power Flame 1.2 million BTU burner.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 2 Side exit doors
• 24 light fixtures on upper hip wall and 12 fixtures on lower wall, both placed horizontal.
• Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (2 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M1.5 required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (3 required for sufficient air flow)
• ADDLIGHT - Class 1 Div2 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• OCER1116 - Electric center dividing door
• M50DP - Dual control system (2 booth panels)
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• OW20 - 20' width Option (includes upgrade to 2- M2)
• OW23 - 23' width Option (includes upgrade to 2- M2)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode (each)
• NVOPDPACK34 - Duct package add per 5' for all ducts (each M1.5/W1DD)

return to top

M501618SD - "Maxi Range" - Solid Back 53.9' x 16.4' x 16.1'

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 2 - M1.5 Intake with 2-7.5 h.p. motors.
• 2 - Direct drive turbine extractors with 10 h.p. motors.
• 2 - Power Flame 1.2 million BTU burner.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 2 Side exit doors
• 24 light fixtures on upper hip wall and 12 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• MRHO18 - Optional height increase to 18.1' (inside 15.9')
• W1DDH - Extractor box with post filtration (2 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M1.5 required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (3 required for sufficient air flow)
• ADDLIGHT - Class 1 Div2 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• OCER1116 - Electric center dividing door
• M50DP - Dual control system (2 booth panels)
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• OW20 - 20' width Option (includes upgrade to 2- M2)
• OW23 - 23' width Option (includes upgrade to 2- M2)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode (each)
• NVOPDPACK34 - Duct package add per 5' for all ducts (each M1.5/W1DD)

return to top

M601618 - "Maxi Range"

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 2 - M2 Intake with 2-7.5 h.p. motors.
• 3 - Direct drive turbine extractors with 10 h.p. motors.
• 2 - Power Flame 1.5 million BTU burners.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 3 Side exit doors
• 28 light fixtures on upper hip wall and 14 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, 100 cfm filter water trap, hose hanger, filters, pressure monitoring gauge and booth guard coating.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (4 required)
• ADDLIGHT - Class 1 Div2 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• OCER1116 - Electric center dividing door
• M60DP - Dual control system (2 booth panels) (1 additional VFD and DDTE with 10 h.p.
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode (each)
• NVOPDPM2-34 - Duct package add per 5' for all ducts (each M2/W1DD)

return to top

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 1 - M1.5 Intake with 2-7.5 hp motors.
• 1 - Direct drive turbine extractor with 10 hp motors.
• Power Flame 1.2 million BTU burner.
• Electric roll up door entrance 11.4' wide by 11.6'.
• 2 Side exit doors
• 12 light fixtures on upper hip wall and 6 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• ADDLIGHT - Class 1 Div2 - 4 tube inside access (each light)
• OPSEXIT Side Exit Door
• O6TUBEFIX 6 - Tube fixture (upgrade each)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode
• NVOPDPACK34 - Duct package add per 5' for all ducts

return to top

M301518 - "Maxi Range" - Solid Back 30.4' x 14.7' x 18.1'

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 1 - M2 Intake with 2-7.5 h.p. motors.
• 2 - Direct drive turbine extractor with 10 h.p. motors.
• Power Flame 1.5 million BTU burner.
• Electric roll up door entrance 11.4' wide by 16'.
• 2 Side exit doors
• 12 light fixtures on upper hip wall and 6 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• ADDLIGHT - Class 1 Div2 - 4 tube inside access (each light)
• OPSEXIT Side Exit Door
• O6TUBEFIX 6 - Tube fixture (upgrade each)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode
• NVOPDPM2-34 - Duct package add per 5' for all ducts

return to top

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 1 - M1.5 Intake with 2-7.5 h.p. motors.
• 2 - Direct drive turbine extractor with 10 h.p. motors.
• Power Flame 1.5 million BTU burner.
• Electric roll up door entrance 11'8" wide by 13.8' tall.
• 2 Side exit doors
• 12 light fixtures on upper hip wall and 6 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (2 required)
• ADDLIGHT - Class 1 Div 2, 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• OM30-4 - Add length to 34.8'
• OM30-2 - Add length to 32.8'
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode
• NVOPDPACK34 - Duct package add per 5' for all ducts (each M1.5/W1DD)

return to top

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 1 - M1.5 Intake with 2-7.5 h.p. motors.
• 2 - Direct drive turbine extractor with 10 h.p. motors.
• Power Flame 1.2 million BTU burner.
• Bifold door (maximum height 10.4')
• 2 Side exit doors
• 12 light fixtures on upper hip wall and 6 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (2 required)
• ADDLIGHT - Class 1 Div 2, 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• OM30-4 - Add length to 34.8'
• OM30-2 - Add length to 32.8'
• OBI-Roll - Exchange of Bifold to Roll up option
• M30DTBI - Drive-Thru Bifolds
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode
• NVOPDPACK34 - Duct package add per 5' for all ducts (each M1.5/W1DD)

return to top

M302018 - "Maxi Range" - Solid Back 30.8' x 20' x 18.1' External

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• 1 Row Pit (39").
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 2 - M1.5 Intake with 2-7.5 h.p. motors.
• 2 - Direct drive turbine extractors with 10 h.p. motors.
• 2 - Power Flame 1.2 million BTU burner.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 2 Side exit doors
• 12 light fixtures on upper hip wall and 4 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Semi-downdraft
• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (2 required)
• ADDLIGHT - Class 1 Div 2, 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• OCER1116 - Electric center dividing door
• M50DP - Dual control system (2 booth panels)
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• OW20 - 20' width Option (includes upgrade to 2- M2)
• OW23 - 23' width Option (includes upgrade to 2- M2)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode (each)
• NVOPDPACK34 - Duct package add per 5' for all ducts (each M1.5/W1DD)

return to top

M751618 - "Maxi Range" - Solid Back 75' x 16' 5" x 18'2"

• Double panel galvanized nut and bolt construction with 2-1/2" insulation.
• Tubular steel super structure for strength integrity.
• White plastic interior blue vinyl exterior.
• "Total Control 300" Featuring Allen Bradley Panel View 300 operator station with SDS (self diagnostic system) ESC System (energy saving control system with automated pressure control).
• Variable Frequency Drive by Allen Bradley.
• 1 Row Pit (39")
• Stainless Steel heat exchanger designed and built by Nova Verta.
• 2 - M2 Intake with 2-7.5 h.p. motors.
• 4 - Direct drive turbine extractors with 10 h.p. motors.
• 2 - Power Flame 1.5 million BTU burners.
• Electric roll up door entrance 11'8" wide by 16' (14' on 16.4' unit) tall.
• 3 Side exit doors
• 40 light fixtures on upper hip wall and 16 fixtures on lower wall, both placed horizontal. Fixtures are 4-48" T8 color corrective with electronic ballast, Class 1 Division 2, with inside access only.
• Duct work package for 20' ceiling (assuming flat roof, add additional ducting if required) including exterior ducting.
• Complete assembly package including all wiring to panel, safety controls, 100 cfm filter water trap, hose hanger, filters, pressure monitoring gauge and booth guard coating.
• Complete assembly package including all wiring to panel, safety controls, and 100 cfm filter water trap.

Options:

• Semi-downdraft
• Total Control 550 - Touch screen upgrade with self diagnostics and maintenance schedules
• W1DDH - Extractor box with post filtration (3 required)
• TMAXDTD - Drive through door option electric roll up
• TMIDDPAC - Duct package add per 5' for all ducts (1 for each M2 is required)
• NVOEWW10 - Water wash extractor (price option less dry unit) (2 required)
• ADDLIGHT - Class 1 Div 2, 4 tube inside access (each light)
• OPSEXIT - Side Exit Door
• OCER1116 - Electric center dividing door
• M60DP - Dual control system (2 booth panels) (1 additional VFD and DDTE with 10 h.p.
• O6TUBEFIX - 6 - Tube fixture (upgrade each)
• Direct Fire 1.5 - Removes heat exchanger flue pipe and prep mode (each)
• NVOPDPM2-34 - Duct package add per 5' for all ducts (each M2/W1DD)

return to top